Руководство Пользователя для ASUS CDX10
2-16
Chapter 2: Setup
2.1.3. Client Network IP Setting
•
LAN setup
•
DHCP setting
By default setting, client will request DHCP as local IP when client
system boots up. User can check IP status in System Information
window (in Login Widget mode) or in Network setting window (in
Desktop mode). If the client IP is not correctly set, user can request
DHCP again or set static IP.
• DHCP auto reconnect function
If network cable is dropped accidently at DHCP connective status,
local IP can be automatically requested again from DHCP server in
10 seconds when user plug in network cable.
• Static IP
If static IP is preferred, user can manually set IP / Subnet Mask value
to local client. Optionally user can also specify Default gateway and
DNS IP.
Firewall limited
When use the client system make sure the firewall is not blocking access.
If the functions list below can’t work normally then check the firewall.
1. Login to server
2. FTP Firmware Update
3. NTP Time Synchronize
4. RM Device Manager (ACDM)
1. Login to server
2. FTP Firmware Update
3. NTP Time Synchronize
4. RM Device Manager (ACDM)
Notice:
Under the same operating system environment, using Apache to install
another application that will cause ACDM work abnormal.