Инструкция для Canon imagePROGRAF iPF9400S
6
If the paper is not visible, lift the Ejection Guide, remove
the Roll Holder, and clear the paper jam from below.
the Roll Holder, and clear the paper jam from below.
After removing the paper, make sure there are no other
scraps of paper in the printer, and then lower the Ejec-
tion Guide.
scraps of paper in the printer, and then lower the Ejec-
tion Guide.
7
If the Carriage is on the left, move the Carriage to the
right until it stops.
right until it stops.
Important
•
Always move the Carriage to the right side. If the Carriage is on the left, a Carriage error may occur when you turn
on the printer.
on the printer.
8
Lower the Release Lever and close the Top Cover.
9
Roll paper cannot be inserted into the paper feed slot
Roll paper cannot be inserted into the paper feed slot
Cause
Corrective Action
The roll paper is warped.
Straighten out curls and reload the roll.
Paper is jammed by the paper feed slot. Remove the jammed paper.
iPF9400S
Roll paper cannot be inserted into the paper feed slot
Troubleshooting
Problems Regarding Paper
891