Инструкция для Canon imagePROGRAF iPF6450
Paper is not cut neatly
Paper is not cut neatly
Cause
Corrective Action
The paper is bent or curled at the cut position.
Straighten out any curling by the edges of the paper.
Paper rises by the ends of the cut position before
it is cut.
it is cut.
Reload the paper correctly.
You are using paper that cannot be cut with the
Cutter Unit.
Cutter Unit.
Specify Manual in Cutting Mode in the Control Panel menu and use scissors or a
cutting tool to cut the roll after printing.
cutting tool to cut the roll after printing.
(See "Specifying the Cutting Method for Rolls.")
→User's Guide
Cut Speed is not configured correctly in the Con-
trol Panel menu.
trol Panel menu.
Change the Cut Speed setting in the Control Panel menu.
During cutting, printed documents fall out at an
angle.
angle.
In the Control Panel menu, set Cutting Mode to Eject. Hold documents after print-
ing, as they are cut.
ing, as they are cut.
(See "Specifying the Cutting Method for Rolls.")
→User's Guide
Paper is not cut
Paper is not cut
Cause
Corrective Action
The printed document became caught on a foreign object by the
Output Tray, which lifted the document. The Cutter passed under
the paper.
Output Tray, which lifted the document. The Cutter passed under
the paper.
Remove the foreign object by the Output Tray to enable the printer to
eject the printed document, keeping it level.
eject the printed document, keeping it level.
In the printer driver, No or Print Cut Guideline is specified in
Automatic Cutting.
Automatic Cutting.
Specify Yes in Automatic Cutting in the printer driver.
In the Control Panel menu, Cutting Mode is set to Eject or Man-
ual.
ual.
If the Cutting Mode is Eject, press the Cut button to cut the paper.
If the Cutting Mode is Manual, cut rolls with scissors or the like.
If the Cutting Mode is Manual, cut rolls with scissors or the like.
Depression on the leading edge is left
Depression on the leading edge is left
Cause
Corrective Action
Keeping a roll in the printer for a long time with-
out printing on it may leave a depression on the
leading edge.
out printing on it may leave a depression on the
leading edge.
When printing quality is most important, we recommend setting TrimEdge Reload to
On or Automatic so that the paper edge is automatically cut before printing.
On or Automatic so that the paper edge is automatically cut before printing.
Margins are wide
Margins are wide
Cause
Corrective Action
Rolls are advanced a specific amount before cutting to prevent problems with cutting and paper ejection.
This operation is normal.
Paper is not cut neatly
iPF6450
Troubleshooting
Problems Regarding Paper
110