Инструкция для Canon imagePROGRAF iPF6400SE

Press ▲ or ▼ to select Roll Length, and then press the OK button.

Press ▲ or ▼ to select the length of paper loaded in the printer, and then press the OK button.
Specify the roll length as follows.

Press the 

◀ or ▶ button to move to the next field for input.

Press the ▲ or ▼ button to enter the value.

Repeat steps 1 and 2 to finish entering the value, and then press the OK button.

Remove rolls from the printer as follows.

Important

Once a roll has been advanced, do not pull the paper out by force. This will prevent further feeding, and the printer
will be unable to keep track of the amount of roll paper left.
If you accidentally pull out paper, follow these steps to remove the roll, and open the paper feed slot.

Note

If you need to cut the roll, 

 

On the Tab Selection screen of the Control Panel, press 

◀ or ▶ to se-

lect the

( Paper tab) .

Note

If the Tab Selection screen is not displayed, press the Menu button.

Press the OK button.
The Paper Menu is displayed.

Press ▲ or ▼ to select Eject Paper, and then press the OK button.

Press ▲ or ▼ to select Yes, and then press the OK button.
The roll is rewound.

Important

If you have selected ManageRemainRoll > On in the
Control Panel menu, a barcode is printed on the lead-
ing edge of the roll.
Do not remove the roll before the barcode is printed.
You will be unable to keep track of the amount of roll
paper left. 

 

 

Removing the Roll from the Printer

                                                                                                                                                                           

iPF6400SE

                                                                                                                                                                                                                             

Handling and Use of Paper

Handling rolls

 

370