Инструкция для Canon imagePROGRAF iPF770 MFP L36
Caution
•
The Stand must be assembled by at least two people on a flat surface. Attempting assembly by yourself
poses a risk of injury or bending the Stand.
poses a risk of injury or bending the Stand.
•
When assembling the Stand, lock all four of the casters. Attempting to move the stand when the casters are
not locked poses a risk of injury or damage to the location site.
not locked poses a risk of injury or damage to the location site.
•
Before moving the assembled stand, lift the support rod to
the position shown (a) and unlock all four casters. Moving
the stand with the support rod lowered or the casters
locked may cause injury or damage the area of installation
or basket cloth.
the position shown (a) and unlock all four casters. Moving
the stand with the support rod lowered or the casters
locked may cause injury or damage the area of installation
or basket cloth.
OFF
a
Note
•
The Stand that can be used with this printer is Printer Stand ST-34 and Printer Stand ST-33.
•
The Stand is described in the illustration of Printer Stand ST-34. Note that the illustrations may look different
from the appearance of your printer in some cases.
from the appearance of your printer in some cases.
Install the printer
1
Mount the printer on the assembled Stand and tighten the
screws firmly.
screws firmly.
iPF770
Reinstalling the Printer
Maintenance and Consumables
Other Maintenance
571