Инструкция для Canon imagePROGRAF iPF770 MFP L36
Cannot load sheets
Cannot load sheets
Cause
Corrective Action
The paper source selection is incorrect. Press the Load button and select the paper source.
Paper is not cut neatly
Paper is not cut neatly
Cause
Corrective Action
The paper is bent or curled at the cut position.
Straighten out any curling by the edges of the paper.
Paper rises by the ends of the cut position before
it is cut.
it is cut.
Reload the paper correctly.
You are using paper that cannot be cut with the
Cutter Unit.
Cutter Unit.
Specify Manual in Cutting Mode in the Control Panel menu and use scissors or a
cutting tool to cut the roll after printing.
cutting tool to cut the roll after printing.
Cut Speed is not configured correctly in the Con-
trol Panel menu.
trol Panel menu.
Change the Cut Speed setting in the Control Panel menu.
During cutting, printed documents fall out at an
angle.
angle.
In the Control Panel menu, set Cutting Mode to Eject. Hold documents after print-
ing, as they are cut.
ing, as they are cut.
Paper is not cut
Paper is not cut
Cause
Corrective Action
In the printer driver, No or Print Cut Guideline is specified in Au-
tomatic Cutting.
tomatic Cutting.
Specify Yes in Automatic Cutting in the printer driver.
In the Control Panel menu, Cutting Mode is set to Eject or Man-
ual.
ual.
If the Cutting Mode is Eject, press the Cut button to cut the paper.
If the Cutting Mode is Manual, cut rolls with scissors or the like.
If the Cutting Mode is Manual, cut rolls with scissors or the like.
Depression on the leading edge is left
Depression on the leading edge is left
Cause
Corrective Action
Keeping a roll in the printer for a long time
without printing on it may leave a depression
on the leading edge.
without printing on it may leave a depression
on the leading edge.
When printing quality is most important, we recommend setting TrimEdge Reload to On
or Automatic so that the paper edge is automatically cut before printing.
or Automatic so that the paper edge is automatically cut before printing.
The size of clear film cannot be detected
The size of clear film cannot be detected
Cause
Corrective Action
The Platen is soiled with ink or other substances. Open the Top Cover and clean the entire Platen.
iPF770
Cannot load sheets
Troubleshooting
Problems Regarding Paper
585