Инструкция для Canon imagePROGRAF iPF850 MFP M40
Cause
Corrective Action
The Platen suction is too strong.
Close the blue Switch on the platen so that it matches the paper size.
(See "Setting the Blue Switch on the Platen.")
➔
User's Guide
Incorrect Printhead alignment val-
ue.
ue.
In the Control Panel menu, set Head Height to a lower height.
(See "Troubleshooting Paper Abrasion and Blurry Images.")
➔
User's Guide
The type of paper specified in the
printer driver does not match the
type loaded in the printer.
printer driver does not match the
type loaded in the printer.
Load paper of the same type as you have specified in the printer driver.
Make sure the same type of paper is specified in the printer driver as you have loaded in the
printer.
printer.
1.
Press the Stop button and stop printing.
2.
Change the type of paper in the printer driver and try printing again.
The contrast becomes uneven during printing
The contrast becomes uneven during printing
Cause
Corrective Action
The paper feed amount is out of adjust-
ment.
ment.
Adjust the feed amount.
(See "Adjusting the Feed Amount.")
➔
User's Guide
The type of paper specified in the printer
driver does not match the type loaded in
the printer.
driver does not match the type loaded in
the printer.
Load paper of the same type as you have specified in the printer driver.
Make sure the same type of paper is specified in the printer driver as you have loaded
in the printer.
in the printer.
1.
Press the Stop button and stop printing.
2.
Change the type of paper in the printer driver and try printing again.
The length of printed images is inaccurate in the feeding direction
The length of printed images is inaccurate in the feeding direction
Cause
Corrective Action
In the Control Panel menu, Adj. Priority is
set to Print Quality.
set to Print Quality.
Set Adj. Priority to Print Length in the Control Panel menu, and then execute Ad-
just Length.
just Length.
(See "Adjusting the Feed Amount.")
➔
User's Guide
If Adjust Length is executed with the
Stacker installed on the printer, adjustment
is not performed correctly.
Stacker installed on the printer, adjustment
is not performed correctly.
Remove the Stacker from the printer and execute Adjust Length.
The type of paper specified in the printer
driver does not match the type loaded in
the printer.
driver does not match the type loaded in
the printer.
Load paper of the same type as you have specified in the printer driver.
Make sure the same type of paper is specified in the printer driver as you have loaded
in the printer.
in the printer.
1.
Press the Stop button and stop printing.
2.
Change the type of paper in the printer driver and try printing again.
Images are printed crooked
Images are printed crooked
Cause
Corrective Action
In the Control Panel menu, Skew Check Lv. is set to Loose or Off.
In the Control Panel menu, set Skew Check Lv. to Standard.
In the Control Panel menu, Width Detection is set to Off.
Set Width Detection to On in the Control Panel menu.
iPF850 Series
The contrast becomes uneven during printing
Troubleshooting
Problems with the printing quality
131