Инструкция для Canon imagePROGRAF iPF850 MFP M40
1
Turn the printer on.
2
Check that the Stacker Canopy (a) and Output
Stacker (b) are closed, and then unlock all of the
casters on the stacker stand.
Stacker (b) are closed, and then unlock all of the
casters on the stacker stand.
3
Hold the Stacker outer frame (c) and move the
Stacker so that the triangle markings (a) on the left
and right side of the Stacker stand are aligned with
the sides (b) of the front face of the Docking unit
left and Docking unit right.
Stacker so that the triangle markings (a) on the left
and right side of the Stacker stand are aligned with
the sides (b) of the front face of the Docking unit
left and Docking unit right.
Caution
•
Do not move the Stacker by holding at positions other than the specified ones. Moving it by holding at
other positions may cause injuries or damage the stacker.
other positions may cause injuries or damage the stacker.
Important
•
Before moving the Stacker, clear away all of the paper contained in the stacker. If you move the Stacker
while it still contains paper, the printed documents may become scratched.
while it still contains paper, the printed documents may become scratched.
OFF
a
b
a
b
a
b
c
iPF850 Series
Installing and Removing the Stacker On the Printer
Handling Paper
Stacker
31