Инструкция для Canon imagePROGRAF iPF850 MFP M40
•
Head Cleaning A
Use this mode if printing is faint or contains foreign substances. This method of cleaning consumes the least
amount of ink.
Use this mode if printing is faint or contains foreign substances. This method of cleaning consumes the least
amount of ink.
•
Head Cleaning B
Use this mode if no ink is ejected at all, or if Head Cleaning A does not solve the problem.
Use this mode if no ink is ejected at all, or if Head Cleaning A does not solve the problem.
Important
•
Do not remove the Maintenance Cartridge or ink tanks during either Head Cleaning A or Head Cleaning B.
Ink may leak or an error may occur.
Ink may leak or an error may occur.
•
If printing does not improve even if you execute Head Cleaning B, try repeating Head Cleaning B once or
twice. If this still does not improve printing, the Printhead may have reached the end of its useful life. Contact
your Canon dealer for assistance.
twice. If this still does not improve printing, the Printhead may have reached the end of its useful life. Contact
your Canon dealer for assistance.
Note
•
By default, nozzles are checked at fixed intervals.
Configure the settings on the Control Panel menu in Nozzle Check.
Configure the settings on the Control Panel menu in Nozzle Check.
(See "Menu Settings.")
➔
User's Guide
Perform cleaning as follows.
1
On the Tab Selection screen of the Control Panel, press
◀ or
▶ to select the Settings/Adj. tab (
).
Note
•
If the Tab Selection screen is not displayed, press the Menu button.
2
Press the OK button.
The Set./Adj. Menu is displayed.
The Set./Adj. Menu is displayed.
3
Press ▲ or ▼ to select Maintenance, and then press the OK button.
4
Press ▲ or ▼ to select Head Cleaning, and then press the OK button.
5
Press ▲ or ▼ to select Head Cleaning A or Head Cleaning B, and then press the OK button.
Head cleaning is now executed.
Head cleaning is now executed.
6
Print a test pattern to check the nozzles, and determine whether cleaning has cleared the nozzles.
(See
"Checking for Nozzle Clogging.")
➔
User's Guide
Cleaning the Stacker
Cleaning the Stacker
If the front or back surfaces of the paper are soiled, clean the Stacker.
Items to Prepare
Roll paper
An unused roll at least 254.0 mm (10.00 in) wide
Note
•
Approximately 1 m (1.09 yd) of roll paper is used by this operation.
1
Turn the printer and Stacker off.
Cleaning the Stacker
iPF850 Series
Consumables and Maintenance
Cleaning the Printer
62