Инструкция для Canon imagePROGRAF iPF670 MFP L24
k
Cutter Rail
The Cutter Unit passes over this rail to cut paper.
The Cutter Unit passes over this rail to cut paper.
l
Output Tray
All printed documents are ejected from this slot.
All printed documents are ejected from this slot.
m
Ejection Guide
Supports output paper.
Supports output paper.
n
Top Cover
Open this cover to install the Printhead and remove any jammed paper from inside the printer, as needed.
Open this cover to install the Printhead and remove any jammed paper from inside the printer, as needed.
o
Width Guide
When loading the sheets , move the guide to match the paper size.
When loading the sheets , move the guide to match the paper size.
p
Stand (Optional)
A stand that holds the printer. Equipped with casters to facilitate moving it.
A stand that holds the printer. Equipped with casters to facilitate moving it.
(See "Stand.")
➔
User's Guide
Note
•
The Stand that can be used with this printer is Printer Stand ST-27 and Printer Stand ST-26.
•
The Stand is normally offered as an optional accessory, but either one or the other of the Stand may be included
as a standard accessory in some sales regions and periods.
as a standard accessory in some sales regions and periods.
•
The output stacker of the Printer Stand ST-26 has a regular position and an Extended position A.
For details on the extended position,
For details on the extended position,
see "Using the Output Stacker."
➔
User's Guide
•
The Stand is described in the illustration of Printer Stand ST-27. Note that the illustrations may look different from
the appearance of your printer in some cases.
the appearance of your printer in some cases.
iPF670 Series
Front
Printer Parts
Printer parts
55