Инструкция для Canon imagePROGRAF iPF670 MFP L24

Push the printhead fixer lever all the way

back.

Pull the printhead fixer cover down toward

the front to lock the printhead in place.

Insert the printhead into the carriage (b)

with the ink holes (a) facing away from the

printer as shown in the figure. Carefully

push the printhead firmly into the carriage

(b), ensuring that the part covered by

the protective part does not touch the

carriage.

Close the top cover.

Remove the orange protective part (a).

To remove orange protective part (b),

push the grip (c) as you remove the

part

• Do not reattach the protective part after

removing it. Dispose of these materials

according to local regulations.

Never touch the parts covered by the

protective part. This may damage the

printhead and affect printing quality.

•

The printhead contains ink. When

removing the protective material, it is

recommended that you do it over the

bag that the printhead came in to avoid

spilling the ink and soiling your clothes or

the surrounding items.

•

Lift the printhead fixer cover (a) to open it

fully.

At this time, make sure that no debris

becomes adhere to the contacts (b) on the

carriage.

Hold the printhead by the grips (a) as you

remove it from the pouch.

Pull the printhead fixer lever forward all

the way to open it completely.

Next, install the printhead.

Install the Printhead

When installing the printhead, do not move the carriage (a) from the position shown in the

figure.

If you move the carriage (a), a warning noise sounds and the printhead cannot be installed.

If you have moved the carriage (a), close the top cover. The carriage (a) moves to the position

shown in the figure.

•

Open Upper Cover is shown on the

display screen. As instructed, open the top

cover.

Instructions on printhead attachment are

shown on the display screen.