Инструкция для Canon imagePROGRAF iPF670 MFP L24
Printed colors are inaccurate
Printed colors are inaccurate
Cause
Corrective Action
Color adjustment has not been activated in the Ad-
vanced Settings of the printer driver.
vanced Settings of the printer driver.
In the Advanced Settings of the printer driver, access Color Settings in Color
Mode to adjust colors.
Mode to adjust colors.
Colors have not been adjusted on the computer or
monitor.
monitor.
Refer to the computer and monitor documentation to adjust the colors.
Adjust the settings of the color management software, referring to the software
documentation as needed.
documentation as needed.
The Printhead nozzles are clogged.
Print a test pattern to check the nozzles and see if they are clogged.
Application Color Matching Priority is set to Off in
the Windows printer driver.
the Windows printer driver.
Click Special Settings in the Layout sheet of the printer driver, and set Applica-
tion Color Matching Priority to On in the dialog box that is displayed.
tion Color Matching Priority to On in the dialog box that is displayed.
Color may change slightly even on the same model
of printer if you use a different version of the firm-
ware or printer driver, or when you print under differ-
ent settings or in a different printing environment.
of printer if you use a different version of the firm-
ware or printer driver, or when you print under differ-
ent settings or in a different printing environment.
Follow these steps to prepare the printing environment.
1.
Use the same version of firmware or printer driver.
2.
Specify the same value for all settings items.
Banding in different colors occurs
Banding in different colors occurs
Cause
Corrective Action
The paper feed amount is out of adjust-
ment.
ment.
Adjust the feed amount.
Printing does not proceed smoothly be-
cause print jobs are interrupted during
transmission.
cause print jobs are interrupted during
transmission.
Exit other applications and cancel other print jobs.
In the Control Panel menu, Adj. Priority
is set to Print Length.
is set to Print Length.
Setting Adj. Priority to Print Quality in the Control Panel menu and adjusting the feed
amount may improve results.
amount may improve results.
The Printhead is out of alignment.
Adjust the Printhead alignment.
The Printhead nozzles are clogged.
Print a test pattern to check the nozzles and see if they are clogged.
Streaks may occur if you set the Print
Quality too low.
Quality too low.
Choose a higher level of Print Quality in the Advanced Settings of the printer driver and try
printing again.
Printing in Fast or Standard mode is faster and consumes less ink than in Highest or High
modes, but the printing quality is lower.
printing again.
Printing in Fast or Standard mode is faster and consumes less ink than in Highest or High
modes, but the printing quality is lower.
The type of paper specified in the printer
driver does not match the type loaded in
the printer.
driver does not match the type loaded in
the printer.
Load paper of the same type as you have specified in the printer driver.
Make sure the same type of paper is specified in the printer driver as you have loaded in the
printer.
printer.
1.
Press the Stop button and stop printing.
2.
Change the type of paper in the printer driver and try printing again.
iPF670
Printed colors are inaccurate
Troubleshooting
Problems with the printing quality
593