Инструкция для Canon imagePROGRAF iPF785 MFP M40
Depression on the leading edge is left
Depression on the leading edge is left
Cause
Corrective Action
Keeping a roll in the printer for a long time
without printing on it may leave a depression
on the leading edge.
without printing on it may leave a depression
on the leading edge.
When printing quality is most important, we recommend setting TrimEdge Reload to On
or Automatic so that the paper edge is automatically cut before printing.
or Automatic so that the paper edge is automatically cut before printing.
The size of clear film cannot be detected
The size of clear film cannot be detected
Cause
Corrective Action
The Platen is soiled with ink or other substances. Open the Top Cover and clean the entire Platen.
Roll Paper is Continuously Ejected
Roll Paper is Continuously Ejected
Cause
Corrective Action
Although sheets are se-
lected as the paper
source, a roll was ad-
vanced.
lected as the paper
source, a roll was ad-
vanced.
After roll ejection stops, follow these steps to reload the roll.
1.
Push the Release Lever back.
2.
Open the Roll Cover.
3.
Using both hands, rotate the Roll Holder toward the back to rewind the roll. At this time, ensure that both
ends of the roll are rewound evenly.
ends of the roll are rewound evenly.
4.
Pull the Release Lever forward.
5.
Load the roll. At this time, be sure to press the Load button and select "Load Roll Paper".
Depression on the leading edge is left
iPF785
Troubleshooting
Problems Regarding Paper
636