Инструкция для Canon imagePROGRAF iPF830

Cause

Corrective Action

Press ▲ or ▼ to select Change Pa-
per, and then press the OK button to
stop printing.

Press ▲ or ▼ and select Stop Print-
ing or press the Stop button to stop
printing.

Cause

Corrective Action

Paper that is too large for the printer has been
loaded.

Lift the Release Lever and load paper of the correct size.

 (See "Paper Sizes.")

➔

Paper that is too small for the printer has been
loaded.

Lift the Release Lever and load paper of the correct size.

 (See "Paper Sizes.")

➔

Paper has been loaded that is too small to
print the test pattern for printhead adjustment
or nozzle checking.

Lift the Release Lever and load unused paper A4/Letter (vertical) or larger. More
than one sheet may be required depending on the adjustment.

Cause

Corrective Action

You have attempted to print on a roll,
but no roll is loaded.

Press ▲ or ▼ to select "Load Roll Paper", and then press the OK button. Load the roll,
and then print.

Press ▲ or ▼ and select Stop Printing or press the Stop button to stop printing.

Cause

Corrective Action

A print job for rolls was received when a
sheet is loaded.

Follow these steps to load and print on a roll.

Press ▲ or ▼ to select Eject Cut Sheet, press the OK button, and remove the sheet.

Load a new roll.

The printer now starts printing the print job.

Press ▲ or ▼ to select Stop Printing, and then press the OK button.

iPF830 Series

                                                                                                                                   

This paper cannot be used as size is not supported.

                                                                                                                                                                                                                       

Error Message

Messages regarding paper

125