Инструкция для Canon imagePROGRAF iPF830 MFP M40
Prepare for parts replacement.
Prepare for parts replacement.
Cause
Corrective Action
It is almost time to replace consumables
for which service is required.
for which service is required.
You can continue to use the printer for some time until "Parts replacement time has
passed." will be displayed.
Contact your Canon dealer for assistance.
passed." will be displayed.
Contact your Canon dealer for assistance.
Parts replacement time has passed.
Parts replacement time has passed.
Cause
Corrective Action
It is past the recommended time to replace consumables for which service is required. Contact your Canon dealer for assistance.
Unknown file.
Unknown file.
Cause
Corrective Action
Data sent to keep the printer up to date (such as pa-
per information) is in the wrong format.
per information) is in the wrong format.
Check the data. Turn off the printer and wait a while before restoring power,
and then resend the data.
and then resend the data.
You have uploaded firmware for a different model.
Check the firmware version. Turn off the printer and wait a while before re-
storing power, and then resend the firmware.
storing power, and then resend the firmware.
If the message is displayed again, contact your Canon dealer for assistance.
Multi-sensor error
Multi-sensor error
Cause
Corrective Action
Direct sunlight or strong lighting may be shining on
the printer and causing the sensor to malfunction.
the printer and causing the sensor to malfunction.
Take steps to ensure the printer is not used when exposed to direct sunlight
or strong lighting.
or strong lighting.
The performance of a sensor inside the printer may
be impaired.
be impaired.
Turn off the printer and wait at least three seconds before restoring the pow-
er.
If the message is displayed again, contact your Canon dealer for assistance.
er.
If the message is displayed again, contact your Canon dealer for assistance.
Prepare for parts replacement.
iPF830
Error Message
Other Messages
658