Инструкция для Canon imagePROGRAF iPF830
3
On the Tab Selection screen of the Control Panel, press
◀ or ▶ to
select the Settings/Adj. tab (
).
Note
•
If the Tab Selection screen is not displayed, press the Menu button.
4
Press the OK button.
The Set./Adj. Menu is displayed.
The Set./Adj. Menu is displayed.
5
Press ▲ or ▼ to select Take-up Reel, and then press the OK button.
6
Press ▲ or ▼ to select Use Take-up Reel, and then press the OK button.
7
Press ▲ or ▼ to select Disable, and then press the OK button.
Loading the Rewind Spool on the Media Take-up Unit
Loading the Rewind Spool on the Media Take-up Unit
1
When using the Output Stacker, stow the Output Stacker before this procedure. (See "
Important
•
Position the Basket Cloth and Basket Rod so they do
not interfere with the Media Take-up Sensor (wave
portion). This may impair operation.
not interfere with the Media Take-up Sensor (wave
portion). This may impair operation.
2
Unlock the flange on the left side of the Rewind Spool by
lifting the lever (a) from the shaft side. Remove the flange.
lifting the lever (a) from the shaft side. Remove the flange.
a
iPF830
Loading the Rewind Spool on the Media Take-up Unit
Handling and Use of Paper
Media take-up unit
367