Инструкция для Canon imagePROGRAF iPF830

Cause

Corrective Action

The roll paper is warped.

Straighten out curls and reload the roll.

Paper is jammed by the paper feed slot. Remove the jammed paper.

The paper source selection is incorrect.

Press the Load button and select the paper source.

Cause

Corrective Action

The paper source selection is incorrect. Press the Load button and select the paper source.

Cause

Corrective Action

The paper is bent or curled at the cut position.

Straighten out any curling by the edges of the paper.

Paper rises by the ends of the cut position be-
fore it is cut.

Reload the paper correctly.

You are using paper that cannot be cut with the
Cutter Unit.

Specify Manual in Cutting Mode in the Control Panel menu and use scissors or
a cutting tool to cut the roll after printing.
 (See "

Cut Speed is not configured correctly in the
Control Panel menu.

Change the Cut Speed setting in the Control Panel menu.
 (See "

During cutting, printed documents fall out at an
angle.

In the Control Panel menu, set Cutting Mode to Eject. Hold documents after
printing, as they are cut.
 (See "

Cause

Corrective Action

In the printer driver, No or Print Cut
Guideline is specified in Automatic
Cutting.

Specify Yes in Automatic Cutting in the printer driver.
 (See "

In the Control Panel menu, Cutting
Mode is set to Eject or Manual.

If the Cutting Mode is Eject, press the Cut button to cut the paper.
If the Cutting Mode is Manual, cut rolls with scissors or the like.
 (See "

Rolls are not cut when you are using
the Media Take-up Unit.

Either cut the roll paper by pressing the Cut button or lift the Release Lever and cut the
roll with scissors.
 (See "

Cause

Corrective Action

There is a foreign object in the path of the Media Take-up Sensor (in-
dicated by a dotted line).

Remove the foreign object from the Media Take-up Sensor
path. Arrange the Basket Cloth and Basket Rod so they do
not interfere with the Media Take-up Sensor.

Roll paper cannot be inserted into the Paper Feed Slot

                                                                                                                                            

iPF830

                                                                                                                                                                                                                     

Troubleshooting

Problems Regarding Paper

 

614