Инструкция для Canon imagePROGRAF iPF830
Setting Item
Description, Instructions
HDD Information
Indicates the total hard disk capacity and the mail box free
space.
space.
*1:Canon cannot guarantee the accuracy of these estimates. These estimates will also vary depending on the conditions of print-
er use.
*2:This is displayed when Show Job Log is On in System Setup.
*3:Even if Show Job Log is Off in System Setup, it is displayed if a password is configured in Change Password in the
*3:Even if Show Job Log is Off in System Setup, it is displayed if a password is configured in Change Password in the
Admin. Menu and the password has been authenticated.
Set./Adj. Menu
Limited items are displayed during printing. The displayed items are indicated by annotations.
Setting Item
Description, Instructions
Test
Print
Nozzle Check
Print a test pattern to check the nozzles.
Status Print
Print information about the setting values and condition of
the printer.
the printer.
Interface Print
Print interface settings information.
GL2 Set Print
Print the settings as specified in GL2 Settings.
Paper Details
Print the paper settings as specified in Paper Details.
Print Job Log
Print information to match the Job Log display state.
This is not printed when the Job Log is configured to not
display.
The maximum number of history records in models fitted
with a hard disk is 32.
The maximum number of history records in models not fit-
ted with a hard disk is 10.
This is not printed when the Job Log is configured to not
display.
The maximum number of history records in models fitted
with a hard disk is 32.
The maximum number of history records in models not fit-
ted with a hard disk is 10.
Menu Map
Print the menu structure.
Color Palette
Print the GL2 color palette.
Adjust
Printer
Printer
Head
Posi.
Adj.
Posi.
Adj.
Standard
An adjustment pattern is printed and the print position is
automatically adjusted to fix misaligned printing. Select
Standard if vertical lines in printed material are warped or
colors are out of alignment. Select Standard also if the
printing results are not improved by executing Simple.
(See "
automatically adjusted to fix misaligned printing. Select
Standard if vertical lines in printed material are warped or
colors are out of alignment. Select Standard also if the
printing results are not improved by executing Simple.
(See "
Simple
An adjustment pattern is printed and the print position is
automatically adjusted to fix misaligned printing. Simple
executes a simple adjustment in a short time. Select Sim-
ple when frequently adjusting the printhead, such as dur-
ing daily maintenance. (See "
automatically adjusted to fix misaligned printing. Simple
executes a simple adjustment in a short time. Select Sim-
ple when frequently adjusting the printhead, such as dur-
ing daily maintenance. (See "
Other
Initial adjustmt
Printhead position adjustment is executed during the initial
setup. If adjusting the printhead position has not been per-
formed such as due to an error during initial setup or the
state of the operating settings when replacing the print-
head, select Initial adjustmt. (See "
setup. If adjusting the printhead position has not been per-
formed such as due to an error during initial setup or the
state of the operating settings when replacing the print-
head, select Initial adjustmt. (See "
Manual
Input the setting values from the adjustment pattern print-
ing results and adjust the printing position to fix mis-
aligned printing. Normally, select Standard. However,
when printing on special paper, or if printing is not im-
proved after Standard, try Manual. (See "
ing results and adjust the printing position to fix mis-
aligned printing. Normally, select Standard. However,
when printing on special paper, or if printing is not im-
proved after Standard, try Manual. (See "
Head Inc. Adj.
Print a test pattern for adjustment of the Printhead orienta-
tion. (See "
tion. (See "
Menu Settings
iPF850
Control Panel
Printer Menu
452