Инструкция для Canon imagePROGRAF iPF830
On the other hand, specifying a high Printhead height will prevent paper from rubbing against the Printhead but
may reduce the printing quality.
may reduce the printing quality.
Important
•
Paper rubbing against or becoming caught on the Printhead may jam or result in printed documents that are
soiled.
soiled.
Note
•
Raise or lower the printhead, depending on the nature of the problem.
(See "
(See "
1
On the Tab Selection screen of the Control Panel, press
◀ or ▶ to
select the Paper tab (
).
Note
•
If the Tab Selection screen is not displayed, press the Menu button.
2
Press the OK button.
The Paper Menu is displayed.
The Paper Menu is displayed.
3
Press ▲ or ▼ to select Paper Details, and then press the OK button.
4
Press ▲ or ▼ to select the type of paper, and then press the OK button.
Note
•
When Head Height is set to Automatic, the setting value selected for the previous print job is displayed
(to the right of Automatic ) once you select the type of paper currently supplied.
Note that this is not displayed if any of the following is executed.
(to the right of Automatic ) once you select the type of paper currently supplied.
Note that this is not displayed if any of the following is executed.
•
Turning off the power
•
Replacing paper
•
Entering sleep mode
5
Press ▲ or ▼ to select Head Height, and then press the OK button.
6
Press ▲ or ▼ to select the desired setting value, and then press the OK button.
Note
•
Using Automatic will ensure that the printer adjusts the Printhead height to the optimal level before print-
ing, accounting for the ambient temperature and humidity. When a setting other than Automatic is used,
that value will always be applied.
ing, accounting for the ambient temperature and humidity. When a setting other than Automatic is used,
that value will always be applied.
•
Depending on the type of paper, some setting values may not be available.
Ready
Plain Paper
OK: Paper Menu
Plain Paper
iPF850
Troubleshooting Paper Abrasion and Blurry Images
Adjustments for Better Print Quality
Adjusting the Printhead
563