Инструкция для Canon imagePROGRAF iPF770 MFP L36

Head Cleaning B
Use this mode if no ink is ejected at all, or if Head Cleaning A does not solve the problem.

Important

Do not remove the Maintenance Cartridge or ink tanks during either Head Cleaning A or Head Cleaning B.
Ink may leak or an error may occur.

If printing does not improve even if you execute Head Cleaning B, try repeating Head Cleaning B once or twice.
If this still does not improve printing, the Printhead may have reached the end of its useful life. Contact your
Canon dealer for assistance.

Note

By default, nozzles are checked at fixed intervals.
Configure the settings on the Control Panel menu in Nozzle Check.

 (See "Menu Settings.")

➔

Perform cleaning as follows.

 

On the Tab Selection screen of the Control Panel, press 

◀ or

▶ to select the Settings/Adj. tab (

).

Note

If the Tab Selection screen is not displayed, press the Menu button.

Press the OK button.
The Set./Adj. Menu is displayed.

Press ▲ or ▼ to select Maintenance, and then press the OK button.

Press ▲ or ▼ to select Head Cleaning, and then press the OK button.

Press ▲ or ▼ to select Head Cleaning A or Head Cleaning B, and then press the OK button.
Head cleaning is now executed.

Print a test pattern to check the nozzles, and determine whether cleaning has cleared the nozzles. 

 (See

"Checking for Nozzle Clogging.")

➔

 

Cleaning the Printhead

                                                                                                                                                                           

iPF770 Series

                                                                                                                                                                                                                     

Consumables and Maintenance

Cleaning the Printer

 

42