Инструкция для Canon imagePROGRAF iPF8400

 

Insert the Holder Stopper from the left in the Roll Holder
as shown. Holding it at the position shown (b), push it
firmly in until the flange (a) of the Holder Stopper touch-
es the roll. Lock the Holder Stopper lever (c) by pushing
it down toward the shaft side.

Follow these steps to load rolls in the printer.

Important

Always load rolls when the printer is on. If the printer is off when you load a roll, the paper may not be advanced correctly
when you turn the printer on.

Before loading a roll, confirm whether the inside of the Top Cover or the Ejection Guide is soiled. If soiled, we recommend
cleaning in advance. 

 

Press the Load button.

Press ▲ or ▼ to select "Load Roll Paper", and then press the OK button.

Note

If any paper has been advanced that will not be used, a message is shown requesting you to remove it.
Press ▲ or ▼ to select "Yes", and then press the OK button. Remove the paper and go to the next step.

 

 

iPF8400

                                                                                                                                                                                                

Loading Rolls in the Printer

                                                                                                                                                                                                                                         

Handling and Use of Paper

Handling rolls

539