Инструкция для Canon imagePROGRAF iPF8400
5
Close the Top Cover.
6
Tape down printer covers to secure them, in the reverse order of tape removal during installation.
7
Remove the Output Stacker by reversing the installation procedure.
8
Remove the Stand by reversing the installation procedure, when it was attached to the printer.
9
Disassemble and repackage the Stand by following the installation procedure in reverse.
10
Repack the Roll Holder, Holder Stopper, and printer in shipping materials, and then package them in a
shipping box.
shipping box.
Reinstalling the Printer
Reinstalling the Printer
The basic workflow for reinstalling the printer is as follows.
For detailed instructions, see the Setup Guide.
For detailed instructions, see the Setup Guide.
Assemble the stand
1
Referring to the Printer Stand Setup Guide, assem-
ble the Stand.
ble the Stand.
Caution
•
The Stand must be assembled by at least two people on a flat surface. Attempting assembly by yourself poses
a risk of injury or bending the Stand.
a risk of injury or bending the Stand.
•
When assembling the Stand, lock the casters. In addition, always unlock the casters before moving the as-
sembled Stand. Attempting to move the stand when the casters are locked poses a risk of injury or damage to
the location site.
sembled Stand. Attempting to move the stand when the casters are locked poses a risk of injury or damage to
the location site.
iPF8400
Reinstalling the Printer
Printer Relocation
Preparing to Transfer the Printer
81