Инструкция для Canon imagePROGRAF iPF9400
Cause
Corrective Action
You are printing on heavyweight paper or
paper that curls or wrinkles easily after
absorbing ink.
paper that curls or wrinkles easily after
absorbing ink.
When printing on Canon Heavyweight Coated Paper or other paper-based media, choose a
VacuumStrngth setting of Strong or Strongest in the Control Panel menu. If rubbing still
occurs, in the Control Panel menu, use a higher Head Height setting.
VacuumStrngth setting of Strong or Strongest in the Control Panel menu. If rubbing still
occurs, in the Control Panel menu, use a higher Head Height setting.
(See "Adjusting the Vacuum Strength (VacuumStrngth).")
→User's Guide
(See "Troubleshooting Paper Abrasion and Blurry Images (Head Height).")
→User's Guide
When printing on CAD Tracing Paper or other film-based media, choose a VacuumStrngth
setting of Standard, Strong, or Strongest in the Control Panel menu. If rubbing still occurs,
in the Control Panel menu, use a higher Head Height setting.
setting of Standard, Strong, or Strongest in the Control Panel menu. If rubbing still occurs,
in the Control Panel menu, use a higher Head Height setting.
(See "Adjusting the Vacuum Strength (VacuumStrngth).")
→User's Guide
(See "Troubleshooting Paper Abrasion and Blurry Images (Head Height).")
→User's Guide
The Ejection Guide is soiled.
Clean the Ejection Guide.
(See "Cleaning the Printer Exterior.")
→User's Guide
The surface of the paper is dirty
The surface of the paper is dirty
Cause
Corrective Action
The Paper Retainer is soiled.
Clean the Paper Retainer.
You are using a paper that does
not dry easily.
not dry easily.
In the Control Panel menu, set Roll DryingTime to at least 1 min.
(See "Menu Settings.")
→User's Guide
When paper that does not dry easily is used for printing, it may curl during printing and touch the Out-
put Tray.
In this case, in the Control Panel menu, complete the settings for Dry time and Area in Scan Wait
Time.
However, note that printing will now take longer.
put Tray.
In this case, in the Control Panel menu, complete the settings for Dry time and Area in Scan Wait
Time.
However, note that printing will now take longer.
(See "Menu Settings.")
→User's Guide
The back side of the paper is dirty
The back side of the paper is dirty
Cause
Corrective Action
The Platen has become dirty after borderless print-
ing or printing on small paper.
ing or printing on small paper.
Open the Top Cover and clean the Platen.
In the Control Panel menu, set CarriageScanWdth to Fixed.
(See "Menu Settings.")
→User's Guide
The Platen has become soiled because you have
set Width Detection to Off in the Control Panel
menu.
set Width Detection to Off in the Control Panel
menu.
Set Width Detection to On in the Control Panel menu, and then open the Top Cov-
er and clean the Platen.
er and clean the Platen.
Open the Top Cover and clean the Platen. After this, manually advance the roll onto
the Platen before printing.
the Platen before printing.
(See "Feeding Roll Paper Manually.")
→User's Guide
The Platen suction is too strong.
In the Control Panel menu, reduce the level of VacuumStrngth.
(See "Adjusting the Vacuum Strength (VacuumStrngth).")
→User's Guide
"BordlessOversize" is set to Standard in the Con-
trol Panel menu.
trol Panel menu.
Set "BordlessOversize" to "Little" in the Control Panel menu.
(See "Menu Settings.")
→User's Guide
The surface of the paper is dirty
iPF9400
Troubleshooting
Problems with the printing quality
112