Инструкция для Canon imagePROGRAF iPF9400
4
Grasp the Belt, insert it between the Belt Stopper,
and affix the Belt Stopper with a hex screw at the
position indicated.
and affix the Belt Stopper with a hex screw at the
position indicated.
Important
•
Here, the Belt Stopper is the one that was removed and stored after initial installation. Neglecting to attach
the Belt Stopper may damage the printer.
the Belt Stopper may damage the printer.
•
Do not touch the Linear Scale (a), Carriage Shaft
(b), or Fixed Blade (c). This may stain your
hands and damage the printer.
(b), or Fixed Blade (c). This may stain your
hands and damage the printer.
5
Close the Top Cover.
6
Tape down printer covers to secure them, in the reverse order of tape removal during installation.
7
If the Output Stacker is installed, reverse the installation procedure to remove the Output Stacker.
iPF9400
Preparing to Transfer the Printer
Printer Relocation
Preparing to Transfer the Printer
79