Инструкция для Canon imagePROGRAF iPF6400S

Note

Always select media type that is actually set in the printer. When the media you chose is different from the media
set in the printer, you may not receive the desired print results.

Paper Source
You can select the paper source.
The following settings are available for paper source.

Setting

Details

Select for manual paper feed printing.

Select for manual paper feed printing when you want to minimize the margin at the far end
edge of paper.

Select to print on roll paper.

Note

When you select Manual (3mm margins) for Paper Source, the far end edge of printed image may become
defective depending on the paper used. If this happens, select another paper source.

Roll Paper Width
This selects the width of the roll media set to the printer.

Note

Available only if rolls are selected in Paper Source.

Automatic Cutting
You can set the printer to cut roll paper automatically or print a guideline for cutting.
The following settings are available for automatic cutting.

Setting

Details

The value set on the printer operation panel takes priority.

Each page is not cut after it is printed and printing continues without interruption.

A print cut guideline is printed after each page and printing continues without interruption.

Note

Available only if rolls are selected in Paper Source.

Copies
You can input the number of print copies in numerical characters.

Note

The maximum value is 999.

You can change the numbers by clicking either ▲ button or ▼ button.

iPF6400S

                                                                                                                                                                                                 

Paper Settings Panel

                                                                                                                                                                                                                             

Mac OS Software

Color imageRUNNER Enlargement Copy

421