Инструкция для Canon imagePROGRAF iPF6400S

For details, refer to the Color Calibration Management Console instructions.

The Spectrophotometer Unit (option) uses the White/Black Backing Plate to measure colors. Choose white (white
backing) or black (black backing) based on your particular printing application.

Important

The White/Black Backing Plate is fragile. Do not bend or drop it.

 

If the Up-down Unit is lowered, open the Spectropho-
tometer Unit Cover and lift up the central part (near the
blue label) of the Up-down Unit.

Important

Lifting up the ends of the Up-down Unit may cause damage.

Turn the printer off.

Important

If you change the color of the White/Black Backing Plate while the printer is turned on, the printer will not
recognize that the color has changed.

 

Check the selected color.
The selected color is the color where the triangle to the
left of the Spectrophotometer Eject Guide and the trian-
gle to the left of the White/Black Backing Plate meet.

 

Hold the end of the White/Black Backing Plate attached
to the Spectrophotometer Eject Guide and move it in
the direction of the arrow to release it.

Important

When handling the White/Black Backing Plate, do not
touch the white backing plate (a) or black backing plate (b)
directly with your hands.
If the surface becomes dirty or scratched, the printer may
not be able to obtain the correct color measurement re-
sults.

 

 

 

 

Switching the White/Black Backing Plate (Optional) Color

                                                                                                                                           

iPF6400S

                                                                                                                                                                                                                             

Color Management

Color Calibration

 

804