Инструкция для Canon imagePROGRAF iPF6400S
The back side of the paper is dirty
The back side of the paper is dirty
Cause
Corrective Action
The Platen has become dirty after borderless printing or printing on
small paper.
small paper.
Open the Top Cover and clean the Platen.
The Platen suction is too strong.
In the Control Panel menu, reduce the level of VacuumStrngth.
BordlessOversize is set to Standard in the Control Panel menu.
Set BordlessOversize to Little in the Control Panel menu.
Roller marks are left across the trailing edge of paper
Roller marks are left across the trailing edge of paper
Cause
Corrective Action
The paper was removed without pressing the OK button af-
ter printing from the Front Paper Feed Slot.
ter printing from the Front Paper Feed Slot.
Following the instructions displayed, press the OK button, and after re-
moving the paper, press the OK button again.
moving the paper, press the OK button again.
Wipe the rollers to clean them.
Immediately after borderless printing, the trailing edge margin is soiled during regular printing
Immediately after borderless printing, the trailing edge margin is soiled during regular printing
Cause
Corrective Action
Depending on your printing environment, after bor-
derless printing in which the leading and trailing
edge of the roll is cut automatically, any ink adher-
ing to the cutter unit may rub off on the next printed
document.
derless printing in which the leading and trailing
edge of the roll is cut automatically, any ink adher-
ing to the cutter unit may rub off on the next printed
document.
Follow these steps to change the Between Pages setting of Drying Time to a val-
ue between about 30 seconds and 3 minutes before trying borderless printing
again.
ue between about 30 seconds and 3 minutes before trying borderless printing
again.
1.
On the Main sheet of the printer driver, click Advanced Settings by Media
Type.
Type.
2.
Select an ink drying time in the list for the Between Pages setting of Drying
Time.
Time.
Printed colors are inaccurate
Printed colors are inaccurate
Cause
Corrective Action
Color adjustment has not been activated in the Ad-
vanced Settings of the printer driver.
vanced Settings of the printer driver.
In the Advanced Settings of the printer driver, access Color Settings in Color
Mode to adjust colors.
Mode to adjust colors.
Colors have not been adjusted on the computer or
monitor.
monitor.
Refer to the computer and monitor documentation to adjust the colors.
Adjust the settings of the color management software, referring to the software
documentation as needed.
documentation as needed.
The Printhead nozzles are clogged.
Print a test pattern to check the nozzles and see if they are clogged.
In the Windows printer driver, Application Color
Matching Priority is not selected.
Matching Priority is not selected.
Click Special Settings on the Layout sheet of the printer driver and select Ap-
plication Color Matching Priority in the dialog box.
plication Color Matching Priority in the dialog box.
There may be a slight difference in how colors are
printed after Printhead replacement because of indi-
vidual variation among printheads.
printed after Printhead replacement because of indi-
vidual variation among printheads.
Execute color calibration.
Printhead characteristics gradually change through
repeated use, and colors may change.
repeated use, and colors may change.
Execute color calibration.
iPF6400S
The back side of the paper is dirty
Troubleshooting
Problems with the printing quality
957