Инструкция для Canon imagePROGRAF iPF6400S
Cause
Corrective Action
The loaded paper is too small.
(When you have attempted to print a test print sheet or other
printer status information.)
(When you have attempted to print a test print sheet or other
printer status information.)
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
PaprWidth Mismatch
PaprWidth Mismatch
Cause
Corrective Action
When Detect Mismatch in the Control Panel menu is set
to Pause or Hold Job, the width of the loaded roll does
not match the width specified in Fit Roll Paper Width in
the printer driver.
to Pause or Hold Job, the width of the loaded roll does
not match the width specified in Fit Roll Paper Width in
the printer driver.
Press ▲ or ▼ to select Print, and then press the OK button to resume
printing.
However, note that this error may cause paper jams and affect the printing
quality.
printing.
However, note that this error may cause paper jams and affect the printing
quality.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Follow these steps to replace the roll to match the width specified in the
printer driver.
printer driver.
1.
Press ▲ or ▼ to select Change Paper, and then press the OK button.
2.
Replace with paper of the width configured in the printer driver.
The printer now starts printing the print job.
Make sure the roll width selected in the dialog box displayed when you se-
lect Fit Roll Paper Width in the printer driver matches the width of the roll
loaded in the printer, and then try printing again.
lect Fit Roll Paper Width in the printer driver matches the width of the roll
loaded in the printer, and then try printing again.
Paper size not detected.
Paper size not detected.
Cause
Corrective Action
Paper has been loaded askew, or warped paper has been loaded.
Press the OK button and reload the paper.
If "Not finished printing. Finish printing
remaining jobs?" is displayed on the Dis-
play Screen, press the OK button.
Printing will resume, starting from the page
on which the error occurred.
remaining jobs?" is displayed on the Dis-
play Screen, press the OK button.
Printing will resume, starting from the page
on which the error occurred.
If this error recurs after you reload the roll,
remove the Roll Holder from the printer, push
the roll firmly in until it touches the Roll Hold-
er flange, and reload the Roll Holder in the
printer.
remove the Roll Holder from the printer, push
the roll firmly in until it touches the Roll Hold-
er flange, and reload the Roll Holder in the
printer.
Insufficient paper for job
Insufficient paper for job
Cause
Corrective Action
The printer has received a print job longer than the amount of roll paper left when
ManageRemainRoll in the Control Panel menu is On.
ManageRemainRoll in the Control Panel menu is On.
Press ▲ or ▼ to select Print, and then press the
OK button to resume printing.
However, the roll paper may run out during the print
job and you may not be able to print all of the docu-
ment.
OK button to resume printing.
However, the roll paper may run out during the print
job and you may not be able to print all of the docu-
ment.
PaprWidth Mismatch
iPF6400S
Error Message
Messages regarding paper
978