Инструкция для Canon imagePROGRAF iPF670
Assemble the stand (optional)
1
If you are using the optional Stand, assemble the
Stand by referring to the Printer Stand Setup Guide
included with the Stand.
Stand by referring to the Printer Stand Setup Guide
included with the Stand.
Caution
•
The Stand must be assembled by at least two people on a flat surface. Attempting assembly by yourself
poses a risk of injury or bending the Stand.
poses a risk of injury or bending the Stand.
•
When assembling the Stand, lock all four of the casters. Attempting to move the stand when the casters
are not locked poses a risk of injury or damage to the location site.
are not locked poses a risk of injury or damage to the location site.
•
Before moving the assembled stand, lift the sup-
port rod to the position shown (a) and unlock all
four casters. Moving the stand with the support
rod lowered or the casters locked may cause in-
jury or damage the area of installation or basket
cloth.
port rod to the position shown (a) and unlock all
four casters. Moving the stand with the support
rod lowered or the casters locked may cause in-
jury or damage the area of installation or basket
cloth.
OFF
a
Note
•
The Stand that can be used with this printer is Printer Stand ST-27 and Printer Stand ST-26.
•
The Stand is described in the illustration of Printer Stand ST-27. Note that the illustrations may look differ-
ent from the appearance of your printer in some cases.
ent from the appearance of your printer in some cases.
•
The Stand is normally offered as an optional accessory, but either one or the other of the Stand may be
included as a standard accessory in some sales regions and periods.
included as a standard accessory in some sales regions and periods.
Reinstalling the Printer
iPF670 Series
Printer Relocation
Preparing to Transfer the Printer
64