Инструкция для Canon imagePROGRAF iPF670
Adjustments for Better Print Quality
Adjustments for Better Print Quality
Adjusting the Printhead
Adjusting the Printhead
Automatic Adjustment to Straighten Lines and Colors
Automatic Adjustment to Straighten Lines and Colors
If printed vertical lines are warped or colors are out of alignment, execute Head Posi. Adj. to adjust the Printhead
alignment.
There are two modes for automatic Printhead adjustment: Auto(Standard) and Auto(Advanced).
Auto(Standard) will fix most slight image distortion or color misalignment, but if not, try Auto(Advanced).
Use Auto(Standard) or Auto(Advanced) to have the printer print and read a test pattern for automatic adjustment
of the Printhead.
alignment.
There are two modes for automatic Printhead adjustment: Auto(Standard) and Auto(Advanced).
Auto(Standard) will fix most slight image distortion or color misalignment, but if not, try Auto(Advanced).
Use Auto(Standard) or Auto(Advanced) to have the printer print and read a test pattern for automatic adjustment
of the Printhead.
Important
•
This function is not available with Tracing Paper, Translucent Matte Film, or Clear Film.
•
If adjustment is not possible as expected using special media, try another type of paper, or try Manual adjust-
ment.
ment.
(See "Manual Adjustment to Straighten Lines and Colors.")
➔
User's Guide
Note
•
Because the results of adjustment vary depending on the type of paper used for adjustment, use the same type of
paper as you will use for printing.
paper as you will use for printing.
•
Use Auto(Standard) if you have switched to another type of paper or if you want the boundaries between colors
to appear as clear as possible.
to appear as clear as possible.
•
Use Auto(Advanced) to fine-tune the space between nozzles or colors if you have switched the printhead or if
clearer printing is required. We recommend Auto(Advanced) for printing at the highest level of quality.
clearer printing is required. We recommend Auto(Advanced) for printing at the highest level of quality.
Paper to Prepare
When Using Rolls
An unused roll at least 10 inches wide
When Using Sheets
Auto(Standard) : One sheet of unused paper of at least A4/Letter size
Auto(Advanced) : Five sheets of unused paper of at least A4/Letter size (or one sheet when using A2 or
larger)
Auto(Advanced) : Five sheets of unused paper of at least A4/Letter size (or one sheet when using A2 or
larger)
Perform adjustment as follows.
1
Load the paper.
•
•
•
Important
•
Always make sure the loaded paper matches the type of paper specified on the printer. Adjust-
ment cannot be completed correctly unless the loaded paper matches the settings.
ment cannot be completed correctly unless the loaded paper matches the settings.
Automatic Adjustment to Straighten Lines and Colors
iPF670 Series
Adjustments for Better Print Quality
Adjusting the Printhead
78