Инструкция для Canon Wireless File Transmitter WFT-E8A
130
Responding to Error Messages
Are the transmitter and the access point set to use the same
authentication method?
authentication method?
The transmitter supports the following authentication methods:
[Open system], [Shared key], and [WPA/WPA2-PSK] (p.27).
[Open system], [Shared key], and [WPA/WPA2-PSK] (p.27).
Are the transmitter and the access point set to use the same
encryption key for authentication?
encryption key for authentication?
The setting is case-sensitive, so check upper- and lower-case
characters. Make sure that the correct encryption key for
authentication is entered on the transmitter (p.32).
characters. Make sure that the correct encryption key for
authentication is entered on the transmitter (p.32).
If filtering by MAC address is active, is the MAC address of the
transmitter used registered at the access point?
transmitter used registered at the access point?
Register the MAC address (p.116) of the transmitter at the access
point.
point.
Are the transmitter and the access point set to use the same
encryption method?
encryption method?
The transmitter supports the following encryption methods: WEP,
TKIP, and AES (p.27).
TKIP, and AES (p.27).
If filtering by MAC address is active, is the MAC address of the
transmitter used registered at the access point?
transmitter used registered at the access point?
Register the MAC address (p.116) of the transmitter used at the
access point.
access point.
63: Wireless LAN authentication failed
64: Cannot connect to wireless LAN terminal