Инструкция для Canon imagePROGRAF iPF9400S

26 

 

6. EXECUTE PAPER FEED ADJUSTMENT AND COLOR CALIBRATION 

Execute paper feed adjustment and color calibration on the paper you are using for printing, and 

put the printer and paper into a state where calibration link is possible. 
 

 

 
The time required for paper feed adjustment and color calibration is approximately 15 minutes for 

each paper type. 

Furthermore, refer to the following for details on the size and amount required. 

When Using Rolls 

An unused roll at least 254.0 mm (10.00 in) wide 

(however, a roll at least 406.4 mm (16.00 in) wide depending 

on the paper type) 

When Using Sheets (only for 

genuine Canon paper) 

One sheet of unused paper of at least A4/Letter size 

(however, one sheet of unused paper of at least A2 size 

depending on the paper type) 

 

Paper feed adjustment and color calibration are executed by using the following procedure. 

 

1.  Load the paper to use for printing into the printer and set the paper type. 

For genuine Canon paper, paper feed adjustment is not needed. Once the paper is loaded 

and the paper type is set, perform the procedure from step 8. 

 

2. On 

the 

Tab Selection screen of the printer control panel, press 

 or 

 to select  

Settings/Adj. tab (

).