Инструкция для Canon Océ VarioPrint 6000+ Series
Operator Manual
Page 57
4.7.4 Setting front and back glue cut-offs:
Glue cut-offs enable you to stop applying the glue film at the front and back of the book's spine.
• In this case, the glue cut-offs are set at
15 mm - 0.6" from the
edges of the book.
The arrows
and
modify this value.
Maximum value: 130 mm - 5.1".
Default value: 5 mm - 0.2".
• If the operator reduces the value below
0", the glue cut-off will be
beyond the edges of the book. Glue will thus be applied to the
whole spine of the book.
Maximum value: 60 mm - 2.36".
Front glue cut-off.
Back glue cut-off.
4.7.5 Activation/deactivation of the first and second glue roller:
Pressing
or
activates or deactivates the first glue cylinder.
Note: In "Block" mode, the first glue roller is deactivated by default.
4.7.6 Activation/deactivation of lateral gluing:
Pressing
or
activates or deactivates lateral gluing
(if the option is installed).
Note: The front and back glue cut-offs for lateral gluing are identical to
those for gluing on the spine of the book.
In "Block" mode, lateral gluing is deactivated by default.