Инструкция для Canon EOS M3 EF-M 18-55mm IS STM Kit Black
49
2
Specify settings.
Select [Auto], [Manual], or [Disable] from the list box.
When setting is completed, click the [Close] button to close the
[Recording settings] window.
[Recording settings] window.
An attenuator settings box appears when
is connected. In conditions with much loud sound,
sound cracking may occur even when shooting with [Sound
recording] set to [Auto] or [Manual]. If there is sound cracking, it
is recommended that you checkmark the attenuator function box
to enable the attenuator function.
recording] set to [Auto] or [Manual]. If there is sound cracking, it
is recommended that you checkmark the attenuator function box
to enable the attenuator function.
Sound recording list box
Wind filter function
Audio recording level
slider
slider
Level meter
1D X Mk II
5DS/5DS R
5D Mk IV
6D
7D Mk II
80D
REBEL T6S
760D
REBEL T6i
750D
Audio Recording/Audio Recording Level
[Auto]:
The audio recording level is adjusted automatically
according to the volume of the sound. When [Auto] is
selected, you can only set the Wind filter function.
according to the volume of the sound. When [Auto] is
selected, you can only set the Wind filter function.
[Manual]: Function for advanced users. You can adjust the audio
recording level as desired.
Drag the audio recording level slider while checking the
level meter to adjust the audio recording level. When the
volume is loud, refer to the peak hold function (approx. 3
seconds) while adjusting so that the right side of “12” on
the level meter (-12 dB) lights intermittently. Exceeding
“0” results in sound cracking.
Drag the audio recording level slider while checking the
level meter to adjust the audio recording level. When the
volume is loud, refer to the peak hold function (approx. 3
seconds) while adjusting so that the right side of “12” on
the level meter (-12 dB) lights intermittently. Exceeding
“0” results in sound cracking.
[Disable]: Sound is not recorded.
Wind Filter Function
When you want to reduce the sound of the wind recorded while
shooting outdoors, checkmark the Wind filter function box to enable
the Wind filter function. It will function only when using a built-in
microphone. However, when enabled, low bass sounds are also
partially reduced, and it is recommended that you remove the
check mark from this box in locations with no wind, to disable the
Wind filter function.
shooting outdoors, checkmark the Wind filter function box to enable
the Wind filter function. It will function only when using a built-in
microphone. However, when enabled, low bass sounds are also
partially reduced, and it is recommended that you remove the
check mark from this box in locations with no wind, to disable the
Wind filter function.