Инструкция для Canon EOS 7D Mark II Wi-Fi Adapter Kit

8

3: Custom ControlsN

450

When you press the button assigned to this function, metering and AF 
are executed.

*1:When assigned to the <p> or <A> button, 

pressing the <B> button while the setting 
screen is displayed will enable you to set the 
detailed AF settings. When shooting, pressing the 
<p> or <A> button will execute AF as it was 
set.

 

AF start position
When [Registered AF point] is set, you can press the <p> or 
<A> button to switch to the registered AF point.

1. Set the AF area selection mode to one of the following: Single-

point Spot AF (manual selection), Single-point AF (manual 
selection), AF point expansion (manual selection 

), AF point 

expansion (manual selection, surrounding points), or 65-point 
automatic selection AF. Zone AF (manual selection of zone) and 
Large Zone AF (manual selection of zone) cannot be selected.

2. Select an AF point manually.
3. Hold down the <S> button and press the <U> button. A beep 

will sound and the AF point will be registered. If the AF area 
selection mode is set to any setting other than 65-point automatic 
selection AF, the registered AF point will blink.

 

When the AF point is registered, the following will be displayed:

• 65-point automatic selection AF: 

 HP (HP: Home Position)

• Spot AF, 1 pt AF, Expand AF Area: SEL

(Center), SEL HP (Off 

center)

 

When registered with SEL

 or SEL HP, the registered AF point will 

blink.

 

To cancel the registered AF point, hold down the <S> button and press 
the <m> button. The registered AF point will also be canceled if you 
select [54: Clear all camera settings].