Инструкция для Canon EOS 7D Mark II Wi-Fi Adapter Kit
474
You can power the camera with a household power outlet by using the
DC Coupler DR-E6 and AC Adapter AC-E6N (both sold separately).
DC Coupler DR-E6 and AC Adapter AC-E6N (both sold separately).
1
Connect the DC Coupler’s plug.
Connect the DC Coupler’s plug to the
AC Adapter’s socket.
AC Adapter’s socket.
2
Connect the power cord.
Connect the power cord as shown in
the illustration.
the illustration.
After using the camera, unplug the
power plug from the power outlet.
power plug from the power outlet.
3
Place the cord in the groove.
Insert the DC Coupler’s cord carefully
without damaging the cord.
without damaging the cord.
4
Insert the DC Coupler.
Open the battery compartment cover
and open the DC Coupler cord hole
cover.
and open the DC Coupler cord hole
cover.
Insert the DC Coupler securely until it
locks and put the cord through the
hole.
locks and put the cord through the
hole.
Close the cover.
Using a Household Power Outlet
DC Coupler cord hole
Do not connect or disconnect the power cord or DC Coupler while the
camera’s power switch is set to <1>.
camera’s power switch is set to <1>.