Ознакомительное Руководство для Olympus fe-26
38
EN
Using OLYMPUS Master 2
System requirements and
installation of OLYMPUS
Master 2
Install the OLYMPUS Master 2 software by
referring to the included installation guide.
referring to the included installation guide.
Connecting the camera to a
computer
1
Make sure the camera is turned off.
The monitor is off.
The lens is retracted.
2
Connect the camera to a computer.
USB cable (supplied)
USB connector
Locate the position of the USB port by
referring to your computer’s instructions
manual.
manual.
●
●
●
3
Press the n button.
The camera turns on.
EASY PRINT
USB
SET
OK
EXIT
CUSTOM PRINT
PC
4
Use kl to select [PC], and
press the B button.
The computer automatically detects the camera as
a new device on the fi rst connection.
a new device on the fi rst connection.
Windows
After the computer detects the camera, a
message indicating setup completion appears.
Confi rm the message and click “OK”. The
camera is recognized as a removable disk.
message indicating setup completion appears.
Confi rm the message and click “OK”. The
camera is recognized as a removable disk.
Macintosh
If iPhoto has started, exit iPhoto and start
OLYMPUS Master 2.
OLYMPUS Master 2.
While the camera is connected to the
computer, shooting functions are disabled.
Connecting the camera to a computer via a
USB hub may cause unstable operation.
When [MTP] is set for the submenu that
appears by pressing n after selecting [PC]
in Step 3, images cannot be transferred to a
computer using OLYMPUS Master 2.
in Step 3, images cannot be transferred to a
computer using OLYMPUS Master 2.
●
●