Ознакомительное Руководство для Olympus e-10

Is “0” and the      mark blinking in the control 
panel?

Is the battery check mark      blinking in the 
control panel?

Is the memory gauge full?

Is the flash mark      blinking in the 
viewfinder?

The card is full. Replace the card with a fresh 
card, or you can delete unneeded images on the 
card to create more storage space on the card, 
or you can transfer all the images to a computer, 
and then delete all the images, or format the 
card.
If folder numbering has reached 999, or if file 
numbering has reached 9999, you will not be 
able to continue shooting pictures with the card, 
even if it is not full. Transfer all images to a 
computer, and then delete all images from the 
card.

Replace the batteries. Check the card 
access lamp. If the card access lamp is 
blinking, wait for it to stop blinking before you 
remove the batteries.

If you are shooting multiple exposures and 
the memory gauge is full, you will not be able 
to continue shooting until the pictures have 
been stored on the memory card. Wait until 
at least one bar on the memory gauge goes 
off before you resume shooting.

The built-in flash is recharging. Wait for the 
flash mark to light and then remain on before 
you resume shooting with the flash.

Is the mode dial set for playback       , print 
reserve mode      , or setup/connection mode
      ?

Set the mode dial to 

, 

, 

, or 

.

Is a card inserted in the camera?

Insert a card in the camera.

Is a protect seal attached to the card?

Remove the card and then remove the 
protect seal, or insert a new card.

➞ 

35

➞ 

33

➞ 

40

➞ 

44

➞ 

70

➞ 

30

➞ 

30