Ознакомительное Руководство для Olympus fe-180

EN

 39

Before installing the OLYMPUS Master software, please confirm that your 
computer is compatible with the following system requirements.
For newer operating systems, please refer to the Olympus web site as shown on 
the back cover of this manual.

OS Windows 

98SE/Me/2000 

Professional/XP

CPU 

Pentium III 500 MHz or later

RAM 

128 MB or more (at least 256 MB is recommended)

Hard disk capacity 

300 MB or more

Connector USB 

port

Monitor 

1,024 × 768 pixels, 65,536 colors or more

• Windows 98 is not supported.
• Data transfer is only guaranteed on computers with a factory installed OS.
• To install the software in Windows 2000 Professional/XP, you must log on as a 

user with administrators’ privileges.

• Internet Explorer and QuickTime 6 or later should be installed on your 

computer.

• Windows XP corresponds to Windows XP Professional/Home Edition.
• Windows 2000 corresponds to Windows 2000 Professional.
• If you are using Windows 98SE, the USB driver is installed automatically.

OS 

Mac OS X 10.2 or later

CPU 

Power PC G3 500 MHz or later

RAM 

128 MB or more (at least 256 MB is recommended)

Hard disk capacity 

300 MB or more

Connector USB 

port

Monitor 

1,024 × 768 pixels, 32,000 colors or more

• Mac operating systems prior to Mac OS X 10.2 are not supported.
• Operation is only guaranteed on a Macintosh equipped with a built-in USB port.
• QuickTime 6 or later and Safari 1.0 or later must be installed.
• Be sure to remove the media (drag & drop onto the trash icon) before 

performing the following operations. Failure to do so could result in unstable 
computer operation and the need to reboot.
• Disconnect the cable connecting the camera to the computer
• Turn off the camera
• Open the camera’s battery/card compartment cover