Справочник Пользователя для Olympus fe-180

52 

EN

Hold the camera correctly and press the shutter button gently to shoot the 
picture. In addition, turn the mode dial to 

h when taking a picture to reduce 

blurring.
The factors that can cause the picture to blur are as follows:

• When you use the optical zoom, digital zoom, or zoom at such higher 

magnifications to shoot the picture

• When the shutter speed is set low to shoot a dark subject
• When the flash cannot be used or a low shutter speed set shooting mode is 

selected.

The flash fires automatically when there is insufficient light or when blurring may 
occur. If the subject is too far away, the flash may have no effect. Here is how to 
take pictures without the flash in this type of situation.
Set the camera to 

h mode

• Because the sensitivity of the CCD increases automatically, you can hold the 

camera and take pictures in darker places with the flash off.

g “h Shooting pictures using digital image stabilization” (P. 15)

There are several factors that can cause the picture to appear grainy.
Using the digital zoom to take close-up pictures

• With the digital zoom, part of the image is cropped and enlarged. The greater 

the magnification, the grainier the picture appears.

Taking pictures with the mode dial set to M or f mode set to W, S 

or X

• When taking pictures with the above scene modes, noise reduction can be 

automatically turned on for clearer pictures of dark subjects. If noise reduction 
does not turn on, the picture may appear grainy.

• Often, bright subjects (such as snow) turn out darker than their natural colors. 

Adjust [EXPOSURE COMP.] toward [+] to make these subjects closer to their 
real shades. Conversely, when you are shooting dark subjects, it can be 
effective to adjust toward [–]. Sometimes, using the flash may not produce the 
brightness (exposure) that was intended.

g “EXPOSURE COMP. Changing picture brightness” (P. 23)

• Set the flash to [

#] to activate fill-in-flash. You can shoot a subject against 

backlight without the face of the subject appearing dark. [

#] is effective for 

shooting against backlight and under fluorescent and other artificial lighting.

g “Y# button Flash shooting” (P. 17)