Инструкция С Настройками для Olympus µ 1200
Menu operations
EN
25
[e SHOOT & SELECT1]/[f SHOOT & SELECT2]
• These scene modes allow you to take sequential pictures by holding down the shutter
button. After shooting the pictures, select the ones you want to erase by marking them with
a R and press
a R and press
S to erase them.
[
S
SMILE SHOT]
When the camera detects a smiling face in shooting standby mode, 3 frames are taken in high
speed sequential shooting mode automatically. You can also shoot pictures manually by
pressing the shutter button in this mode.
• When [SMILE SHOT] is selected, the self-timer lamp lights. Shooting is not available while
speed sequential shooting mode automatically. You can also shoot pictures manually by
pressing the shutter button in this mode.
• When [SMILE SHOT] is selected, the self-timer lamp lights. Shooting is not available while
the self-timer lamp is blinking.
• There may be cases in which the camera cannot detect a smiling face.
• When [DRIVE] is set to [
W], [ISO] is fixed at [AUTO].
• When [3200] or [6400] is selected, [IMAGE QUALITY] is limited to [2048 ×1536] or lower.
CAMERA MENU
WB
................................................................................................. Adjusting the color of a picture
AUTO
The white balance is adjusted automatically for natural color,
regardless of the light source.
regardless of the light source.
5
Sunny day
For shooting under a clear sky.
3
Cloudy day
For shooting under a cloudy sky.
1
Tungsten light For shooting under tungsten lighting.
w
Fluorescent
lamp 1
lamp 1
For shooting under daylight fluorescent lighting. (This type of lamp is
mainly used in homes.)
mainly used in homes.)
x
Fluorescent
lamp 2
lamp 2
For shooting under a neutral white fluorescent lamp. (This type of
lamp is mainly used in desk lamps.)
lamp is mainly used in desk lamps.)
y
Fluorescent
lamp 3
lamp 3
For shooting under a white fluorescent lamp. (This type of lamp is
mainly used in offices.)
mainly used in offices.)
ISO
......................................................................................................Changing the ISO sensitivity
AUTO
Sensitivity is automatically adjusted according to the conditions of the
subject.
subject.
64/100/200/400/
800/1600/3200/
6400
800/1600/3200/
6400
A low value lowers the sensitivity for daylight shooting of clear, sharp
pictures. The higher the value, the better the camera’s light sensitivity and
ability to shoot with a fast shutter speed and in low light conditions.
However, high sensitivity introduces noise into the resulting picture, which
may give it a grainy appearance.
pictures. The higher the value, the better the camera’s light sensitivity and
ability to shoot with a fast shutter speed and in low light conditions.
However, high sensitivity introduces noise into the resulting picture, which
may give it a grainy appearance.
Selected picture.
e
e
GO
OK
BACK
MENU
S
Press
43 to scroll through the pictures.
Pictures with a R mark are erased.
Press
e to mark or unmark the pictures to be erased.
5
d4351_e_0000_7.book Page 25 Wednesday, August 1, 2007 1:52 PM