Инструкция С Настройками для Olympus µ 1200

56 

EN

Getting to know your camera better

• Panning along the camera central axis reduces picture misalignment. When you shoot close subjects, 

panning along the axis of the tip of the lens gives good results.

• In [COMBINE IN CAMERA1] mode, the camera automatically detects its own position except for the 

following cases (In such cases, use [COMBINE IN CAMERA 2] or [COMBINE IN PC].):

• when panning the camera in a quick or unsteadily manner.
• when shooting a low contrast subject (blue sky, etc.).
• when shooting a moving subject framed in full screen.
• when panning the camera with no images on-screen.

• When [SHADOW ADJ. ON] is selected, the subject’s face appears brighter even against 

backlight and the color of the background is enhanced in the picture. This function can also 
be used to shoot a subject inside a home or building from outside.

g “f Brightening the subject against backlight” (P. 17)

• With  [ESP/n] set to [n], the picture can be taken based on the brightness at the center 

of the monitor without being affected by the light in the background.

g “ESP/n Changing the area for measuring the brightness of a subject” (P. 26)

• Set the flash to [

#] to activate fill-in-flash. You can shoot a subject against backlight without 

the face of the subject appearing dark. [

#] is effective for shooting against backlight and 

under fluorescent and other artificial lighting.

g “

3# button Flash shooting” (P. 16)

• Selecting a [+] exposure value with 

1F, is useful in shooting a subject against backlight.

g “

1F button Changing picture brightness (Exposure compensation)” (P. 16)

• When [AF MODE] is set to [FACE DETECT], the camera determines the exposure by 

metering a face and the face in the picture taken will appear brighter even in backlight 
conditions.

g “AF MODE Changing the focusing area” (P. 27)

There are two ways to record the pictures you take with this camera.
Recording pictures to the internal memory

• Pictures are recorded to the internal memory, and when the number of storable still pictures 

reaches 0, you must connect the camera to a computer to download the pictures, and then 
erase the pictures from the internal memory.

• Pictures are recorded to the card when inserted in the camera. When the card is full, you 

can download the pictures to a computer, and then either erase the pictures from the card 
or use a new card.

• Pictures are not recorded to the internal memory when a card is inserted in the camera. 

Pictures in the internal memory can be copied to the card using the [BACKUP] function.

g “BACKUP Copying pictures in the internal memory to the card” (P. 34)

“The card” (P. 66)

d4351_e_0000_7.book  Page 56  Wednesday, August 1, 2007  1:52 PM