Ознакомительное Руководство для Olympus D-150/C-1

VIEWING OR ERASING IMMEDIATELY AFTER SHOOTING

Erasing All Pictures

(All-Frame Erase)

Check that the lens barrier is closed and the
camera is set to the Playback mode by
holding down the

monitor button for a moment.

The following operation clears the card of all stored image data.

Operating Procedure

Press the

OK/menu button.

Press the

arrow pad key

to select

[

The display changes to “YES”.

Press the

OK/menu button.

[

The card setup screen is displayed.

Select

by pressing the

arrow pad key.

Select “YES” by pressing the

arrow pad key.

Press the

OK/menu button.

[

All of the image frame data saved in the
card will be erased.

To cancel all-frame erasure:

In step 5, select “NO” and press the

OK/menu button.

Erasure time may be prolonged if
the card has been subjected to
print reservation (

Page 76).

This is not a malfunction.

v Erasure is not possible if the

image to be erased is protected or
a write protect seal is attached to
the card (

Pages 50, 51).

v For details on handling your card,

refer to the instructions provided
with it.

1 / 3

SET

SELECT

OFF

YES

SET

SELECT

Check the following before
erasing images

To prevent destruction of data on the card, never attempt to open the card cover, remove
the batteries, disconnect the AC adapter or remove the card during erasure.

YES

Playback mode menu 1/3 screen

Card setup screen