Ознакомительное Руководство для Olympus E-20N

The conversion lenses listed below can be attached to this camera. When you use a
conversion lens, set the zoom setting (TELE or WIDE) on the camera and make sure
that the 

 mark is displayed in the control panel. With the 

 mark displayed, the

camera can use the correct methods to set the focus and exposure for the conversion
lens. If you attempt to use a conversion lens with the camera without the 

 mark

displayed, the camera may not be able to set the correct focus and exposure.

The following conversion lenses can be used with this camera.

Note
• Using the built-in flash could cause shadows in the image and should not be used.
• If you use a thick filter, such as a PL filter, or combinations of filters, the areas around the

circumference of the image could become dark. Filters can be attached to the camera, but the
results of shooting with a filter cannot be guaranteed.

        blinks

3x Extension Lens Tele 300 Pro

TCON-300

f2.8

f=420mm equivalent

Filter diameter 49mm

Fully Multi-Coated

Support 
arm

Screw

Screw

Screw

TELE

TELE

WIDE

WIDE - TELE

1.45x Tele Extension Lens Pro

TCON-14B

f2.4

f=200mm equivalent

Filter diameter 86mm

Fully Multi-Coated

0.8x Wide Extension Lens Pro

WCON-08B

f2

f=28mm equivalent

Filter diameter 105mm

Fully Multi-Coated

Macro Extension Lens Pro

MCON-35

f2 - f2.4

Possible to shoot area up 

to size of approx. 49mm x 37mm

Filter diameter 72mm

Fully Multi-Coated

        displayed