Ознакомительное Руководство для Olympus WS-700M

When [PCM] is selected:
 

[44.1 kHz/16 bit]*1

When [MP3] is selected:
 

[256 kbps]*1, [192 kbps]*2, 
[128 kbps]

When [WMA] is selected:
 

[ST XQ], [ST HQ], [ST SP], [HQ], [SP], [LP]

*1 For WS-710M, WS-700M only.
*2 For WS-600S only.

•  To record a meeting and lecture clearly, 

set other than [LP] in [Rec Mode].

•   When the external monaural microphone 

is used while [Rec Mode] is set to a stereo 
recording mode, it enables recording 
only with the L channel microphone.

•  When you increase the value, the 

directivity will narrow.

•  Decreasing the value widens the 

directivity, enables you to record in a 
expansive stereo sound.

•  If you reduce the directivity and widen the 

recording range, you can record in a sound 
with expansive stereo feeling. 

The directional microphone function utilizes 
DiMAGIC’s (DiMAGIC Co., Ltd.) DiMAGIC 
Virtual Microphone (DVM) technology. 
DVM is an audio pickup system which 
allows you to record by focusing on sound 
from any direction. From expansive stereo 
recording to high directivity recording, DVM 
represents the latest in directional control 
methods that allow you to switch to a single 
exclusive microphone.

The recorder has a Low Cut Filter function to 
minimize low-frequency sounds and record 
voices more clearly. This function can reduce 
noise from air conditioners, projectors and 
other similar noises.
[On]:
 

Enables the Low Cut Filter function.

[Off]:
 

Disables this function.

When the microphone senses that sounds have 
reached a preset threshold volume level, the 
built-in Variable Control Voice Actuator (VCVA) 
starts recording automatically, and stops when 
the volume drops below the threshold level. 
The VCVA feature extends recording time and 
conserves memory by stopping recording 
during silent periods, which helps the playback 
to be more efficient.
[On]:
 

Enables the VCVA function. Will start 
recording in VCVA mode.

[Off]:
 

Disables this function. Will resume 
recording in normal mode.

• When 

[V-Sync. Rec] is set to [On], [VCVA] 

is disabled. To use this function, set 
[V-Sync. Rec] to [Off] (

☞ P.51).

s) button to start 

•  When the sound volume is lower than 

the preset threshold sound level, 
recording automatically stops after 
1 sec approximately, and [Standby] 
flashes on the display. The recording 
indicator light glows when recording 
starts and flashes when recording 
pauses.