Инструкция С Настройками для Olympus UFL-3
EN 14
EN
2. Maintaining the Waterproof Function
This product is sealed with an O-ring. Maintenance of the waterproof
function is required even before using this product underwater for the first
time.
For handling the O-ring, refer to P.8.
function is required even before using this product underwater for the first
time.
For handling the O-ring, refer to P.8.
Removing the O-ring
Open the battery cap (
gP.17) and remove the O-ring from the battery
cap.
1
Insert the O-ring remover between the O-ring and the wall of the O-ring
groove.
groove.
2
Move the tip of the inserted remover under the O-ring. (Take care not to
damage the O-ring groove with the tip of the remover.)
damage the O-ring groove with the tip of the remover.)
3
Hold the O-ring with your fingertips after it has come out of the groove and
remove it from the flash.
remove it from the flash.
UFL-3_EN.book Page 14 Thursday, July 17, 2014 5:21 PM