Ознакомительное Руководство для Olympus D-230

En

You can view images stored on the card automatically in their stored order
as a “slide show”. This function is useful when you want to view images in
sequence.

1

Close the lens barrier and press the 

 button.

The camera turns on in the Play mode.

2

Press the 

 button.

The monitor shows the Play menu.

3

Select [PLAY] using the 

 / 

 buttons and press the 

 button.

4

Select [ 

 ] using the 

 / 

 buttons and press the 

 button.

5

Select [START] using the 

 / 

 buttons and press the 

 button.

Auto Playback starts by displaying each image for 3 seconds.
To cancel Auto playback, press the 

 button. Press the 

 button again to

exit the menu.

Note

• If you display the Play menu while the monitor shows a movie, [ 

 ] appears

instead of [ 

 ]. Auto playback can only be started when a still picture is

displayed.

• If the camera is powered by the batteries on the Auto Playback mode, it will

turn off automatically if left unoperated for about 30 minutes.

1

Close the lens barrier and press the 

 button.

The camera turns on in the Play mode.

2

Press the 

 button.

The monitor shows the Play menu.

3

Select [SETUP] using the 

 / 

 buttons and press the 

 button.

4

Select [ 

 ] using the 

 / 

 buttons and press the 

 button.

5

Select [ 

 ALL ERASE]  using the 

 / 

 buttons and press the

 button.

6

Select [ 

 ALL ERASE] using the 

 / 

 buttons to and press the

 button.

All the images are erased.

Caution

• Protected images can not be erased.
• If a write protect seal is attached to the SmartMedia card, the images on the

card can not be erased.

• Erased images can not be restored. Check each image before erasing to avoid

accidentally erasing images you want to keep.

1/Basic05_C2-E.65E

01.8.17, 10:07 AM

22