Инструкция С Настройками для Olympus µ 1060
48
EN
Selecting the video signal system to match your TV [VIDEO OUT]
x SETUP VIDEO OUT
The TV video signal system varies depending on the countries and regions. Before viewing camera
images on your TV, select the video output according to your TV’s video signal type.
Submenu 2
Application
NTSC
The camera is compatible with TVs in North America, Taiwan, Korea, Japan and others.
PAL
The camera is compatible with TVs in Europe, China and others.
The factory default settings differ according to the region where the camera is sold.
To play back camera images on a TV
1 Connect the TV and camera.
Connect to the TV video
input jack (yellow) and
audio input jack (white).
input jack (yellow) and
audio input jack (white).
Multi-connector
A/V cable (supplied)
Connector cover
2 Use the camera to select the video signal format that matches that of the connected TV
([NTSC]/[PAL]).
3 Turn on the TV, and change “INPUT” to “VIDEO (an input jack connected to the camera).”
For details on changing the input source of the TV, refer to the TV’s instruction manual.
4 Set the mode dial to
q, and use 1234 to select the image for playback.
Depending on the TV’s settings, the displayed images and information may become cropped.
book_myu1060SW_en_A.indb 48
book_myu1060SW_en_A.indb 48
2008/07/01 20:46:59
2008/07/01 20:46:59