Инструкция С Настройками для Olympus µ 1060

Скачать
Страница из 78
64
EN
Using an AC adapter
An AC adapter is useful for time-consuming 
tasks such as image downloads to a computer 
or when running a slideshow for a long period of 
time. To use an AC adapter for this camera, the 
multiadapter cable (CB-MA1) is required.
Do not use any other AC adapter with this camera.
Using your charger and AC 
adapter abroad
The charger and AC adapter can be used in 
most home electrical sources within the range of 
100 V to 240 V AC (50/60Hz) around the world. 
However, AC wall outlets are shaped differently 
in different countries or regions. Therefore, the 
charger and AC adapter may require a plug 
adapter to match your wall outlet. For details, ask 
at your local electrical shop or travel agent.
Do not use travel voltage converters as they 
could damage your charger and AC adapter.
Using an xD-Picture Card
A card (and also internal memory) corresponds 
to the fi lm in a fi lm camera. The recorded images 
(data) can be erased, and they can be retouched 
with the use of a computer. Cards can be removed 
from the camera and exchanged, but this is not 
possible with the internal memory. Use of larger 
capacity cards enables you to take more pictures.
Index area
 (Notes can be fi lled in 
here)
Contact area
 (Contact section of the 
card with the internal 
camera terminal)
  Do not touch the contact area directly.
Cards compatible with this camera
xD-Picture Card (16MB to 2GB) (TypeH/M/M+/
Standard)
Using a new card
Before using a non-Olympus card or a card that 
was used for another purpose in a computer 
or other device, use [MEMORY FORMAT]/
[FORMAT] (p. 42)
 to format the card.
Checking the image saving location
The current memory indicator shows whether 
the internal memory or card is being used 
during shooting and playback.
Current memory indicator
IN
: Internal memory is being used
None: Card is being used
Current memory 
indicator
10
M
100-0004
N
ORM
2008.10.26 12:30
4
IN
10
M
P
4
IN
N
ORM
Playback mode
Shooting mode
  Even if [MEMORY FORMAT]/[FORMAT], 
[ERASE], [SEL. IMAGE], or [ALL ERASE] 
is performed, the data in the card is not 
completely erased. When disposing of 
the card, damage the card to prevent the 
disclosure of personal data.
Readout/recording process of the card
Never open the battery/card compartment 
cover while the camera is reading or writing 
data, which is indicated by blinking of the card 
access lamp. This can not only damage the 
image data but also render the internal memory 
or card unusable.
Card access lamp
book_myu1060SW_en_A.indb   64
book_myu1060SW_en_A.indb   64
2008/07/01   20:47:10
2008/07/01   20:47:10