Ознакомительное Руководство для Olympus DS-2500
Inserting and ejecting a SD card
Inserting a SD card
Insert the SD card fully into the card slot with the
card facing the direction shown in the illustration
below, until it clicks into place.
• When inserting SD card into the SD card slot, the
card facing the direction shown in the illustration
below, until it clicks into place.
• When inserting SD card into the SD card slot, the
recorder message [Please Wait] will fl ash on the
LCD display for a few seconds while validating the
SD card.
LCD display for a few seconds while validating the
SD card.
• Insert the card keeping it straight.
Ejecting a SD card
Push the SD card inward once to unlock it, and
let it eject.
let it eject.
Notes
• The card stops with a click when it is inserted
all the way.
•
Inserting the card the wrong way or at an angle
could damage the contact area or cause the
card to jam.
could damage the contact area or cause the
card to jam.
• If the card is not inserted all the way, data may
not be written to the card.
• Hold the card straight and pull it out.
• If an unformatted card is installed, the recorder
• If an unformatted card is installed, the recorder
will automatically display the menu format option
(
(
☞ P.37).
• Never use any card in the recorder unless it has
been formatted on this unit (
☞ P.50).
• Never remove the card while the recorder is in
operation. This may damage the data.
• Releasing your finger quickly after pushing the
card inward may cause it to eject forcefully out of
the slot.
the slot.
1
EN
19
In
se
rt
in
g a
n
n
d e
je
je
ct
in
g
a S
D
D
c
a
rd